Bosch ECU Guide: Choosing a Bosch Motorsport ECU
シェア：
By アンドリウス・コントリマスモータースポーツエンジニア - GT3、LMP3、24時間レースシリーズのレースエンジニア。創設者 XTRA Motorsport.
A “Bosch ECU” in a motorsport context almost always means one specific thing: a unit from the Bosch Motorsport engine control unit range — the MS 6 EVO family, the MS 7 series, or the MS25 diesel unit. These are not the OEM Bosch control units found in a road car, and they are not interchangeable with them. They are standalone, fully calibratable race ECUs that run on the same RaceCon and WinDarab toolchain across the whole range — from GT4 and GT3 up to the top prototype classes.
このガイドでは、 Bosch Motorsport ECU is, how the current lineup is structured, and how to match a unit to an engine — by fuel system (port or direct injection), sealing and connector level, and sensor channel count. If you are still comparing Bosch Motorsport against other engine-management platforms, read スタンドアロンECUの選び方 first; this article assumes the decision to run Bosch Motorsport has already been made.
主要なポイント（要点）
- The MS 6 EVO family (667 MHz, IP54, Bosch connectors) is used across GT4 and GT3 — the MS 6.4 EVO runs in cars such as the Audi R8 LMS, Lamborghini Huracán GT3, and BMW M4 GT3.
- The MS 7 series (1 GHz, IP67, Autosport connectors) sits above it — top prototype classes (LMH and LMDh / IMSA GTP), the DTM four-cylinder turbo era, and top-level Rallycross. The MS 7.8 is the current unit; the MS 7.4 is the earlier one.
- Within the MS 6 EVO range the real differences are fuel system (port injection vs direct injection) and analog input count (21 vs 38) — not application tier.
- All gasoline units manage up to 12 cylinders. The only diesel unit is the MS25 SPORT.
- The whole range shares the same PC software — RaceCon for calibration, WinDarab for analysis — so moving between tiers does not mean relearning the toolchain.
何 Bosch Motorsport ECU is — and what it is not
A Bosch Motorsport ECU is a purpose-built race engine controller. It is sealed, vibration-rated, and wired into a motorsport harness rather than plugged into a factory loom. It is calibrated in RaceCon, logs to internal memory, and the data is analysed in WinDarab. There is no OEM “limp home” behaviour, no dealer tool, and no locked map.
This is a different product to the Bosch ECUs fitted to production cars. An OEM Bosch control unit is a closed, model-specific unit calibrated by the manufacturer. A Bosch Motorsport ECU is an open platform: the engine, sensors, outputs, and strategies are all defined by the team or tuner. The hardware is built to a different standard too — IP54 to IP67 sealing, wide operating temperature range, and motorsport-grade connectors.
その Bosch Motorsport ECU lineup at a glance
All gasoline units below manage engines up to 12 cylinders. The MS25 SPORT is the diesel exception.
| モデル | CPU | シーリング | アナログ入力 | 注射 | Notes |
|---|---|---|---|---|---|
| ＭＳ６エボ | 667 MHz | IP54 | 21 | Port (PFI) | Entry MS 6 EVO |
| ＭＳ６エボ | 667 MHz | IP54 | 38 | Port (PFI) | High analog-input PFI |
| ＭＳ６エボ | 667 MHz | IP54 | 21 | LP + HP (GDI) | Entry direct-injection |
| ＭＳ６エボ | 667 MHz | IP54 | 38 | LP + HP (GDI) | Used in GT3 — Audi R8 LMS, Lamborghini Huracán, BMW M4 GT3 |
| MS 6.4P EVO | 866 MHz | IP54 | 38 (+8 shared) | LP + HP (GDI) | Faster CPU, larger memory |
| MS 7.8 | 1 GHz | IP67 | 46 | Integrated LP + HP | Current MS 7 unit; in-cylinder pressure inputs |
| MS 7.4 | 1 GHz | IP67 | 41 | Integrated LP + HP | Earlier MS 7 unit |
| MS25スポーツ | - | IPx9K | 96入力 | Common-rail diesel | Diesel, up to 8 cyl, 12/24 V |
MS 6 EVO vs MS 7: where the line is drawn
The first decision is which hardware generation the engine and category call for. The MS 6 EVO and MS 7 series differ in four ways that matter at the harness and in scrutineering:
- プロセッサ： MS 6 EVO runs a 667 MHz dual-core processor (866 MHz on the MS 6.4P); the MS 7 series runs at 1,000 MHz.
- シーリング： MS 6 EVO is IP54. The MS 7 series is IP67 — fully sealed against dust and temporary immersion.
- コネクタ： the MS 6 EVO uses Bosch proprietary connectors, available in two sizes — both stocked: the MS6 105-pin mating connector MS6 91-pin mating connector. The MS 7 series uses four Souriau 8STA Autosport connectors, one per harness function: 8STA6-18-35SN (Life), 8STA6-18-35SB (Actuator), 8STA6-18-35SC (Combined), and 8STA6-18-35SA (Sensor).
- Real-time networking: the MS 7 series adds SERCOS3 deterministic Ethernet for sub-millisecond data exchange with other Bosch system devices such as the VCU MS 50.4.
Where each generation runs: the ＭＳ６エボ family is the GT4 and GT3 workhorse. The direct-injection ＭＳ６エボ is used in current GT3 machinery including the Audi R8 LMS, Lamborghini Huracán GT3, and BMW M4 GT3 — modern GT4 and GT3 engines are predominantly direct injection, which is why the GDI-capable MS 6.3/6.4 units dominate this space. The MS 7 series sits above it, in the top prototype classes (LMH and LMDh — Hypercar at Le Mans and GTP in IMSA), the four-cylinder turbo DTM era, and top-level Rallycross.
How to choose: engine and fuel system first
Within the gasoline range, two questions settle the choice. There is no application “tier” to buy into — the hardware differences are concrete.
| Engine / requirement | 推奨ECU |
|---|---|
| Port injection, lower sensor count | ＭＳ６エボ |
| Port injection, high sensor count | ＭＳ６エボ |
| Direct injection (GDI), lower sensor count | ＭＳ６エボ |
| Direct injection (GDI), high sensor count | ＭＳ６エボ |
| Direct injection needing faster CPU / more memory | MS 6.4P EVO |
| Prototype-level engine, in-cylinder pressure analysis, IP67 | MS 7.8 |
| Common-rail diesel engine (up to 8 cylinders) | MS25スポーツ |
Two rules of thumb cut through the rest. First, count the analog inputs before choosing. Within each MS 6 EVO injection type there is a 21-input unit and a 38-input unit — the MS 6.1 vs 6.2 for port injection, the MS 6.3 vs 6.4 for GDI. Map every sensor, add headroom, then pick. Second, direct injection is a hard requirement, not an upgrade path. A port-injection MS 6.1 or 6.2 cannot be converted to direct injection later; a GDI engine needs an MS 6.3/6.4/6.4P or an MS 7 unit from the outset.
Direct injection and diesel
On the MS 6.3, 6.4, and 6.4P EVO, direct injection is enabled by the optional HP (high-pressure) package, which supports dual-bank high-pressure injection for V- and flat-engines with two separate fuel rails. The MS 7.4 and MS 7.8 carry integrated high-pressure injection stages and support triple-injection strategies (port plus two GDI injectors per cylinder). For diesel, the MS25スポーツ is the only dedicated unit: common-rail solenoid injectors, up to 8 cylinders, 12 V or 24 V systems, and IPx9K sealing for engine-bay mounting.
In-cylinder pressure on the MS 7 series
A defining capability of the MS 7 series is that it can read in-cylinder pressure sensors directly, without an additional control box. The MS 7.8 provides fast cylinder-pressure ADC inputs that connect to piezoelectric in-cylinder transducers, giving crank-angle-resolved pressure traces per cylinder. Standard accelerometer knock sensors detect vibration through the engine structure — with latency and cross-cylinder contamination. In-cylinder pressure measurement detects combustion events at the source, letting ignition timing sit at the true knock limit per cylinder. This is one of the main reasons the MS 7 series is the choice at prototype level.
その Bosch Motorsport overview of the MS 7 platform:
The software: RaceCon and WinDarab
全体 Bosch Motorsport ECU range shares one PCソフトウェア toolchain (the PC tools are common across the range; each ECU still runs its own firmware). This shared toolchain is a large part of why teams stay within the ecosystem.
- レースコン is the calibration environment — engine configuration, mapping, I/O assignment, and strategy development. The same interface works across the whole range, so a calibrator moving from an MS 6.1 to an MS 7.8 does not relearn the tool.
- WinDarab (V7) is the data analysis platform — logging download, lap analysis, and telemetry review. It is available as a free viewer and a paid Expert tier; the differences are covered in WinDarab 無料版 vs エキスパート版, and the licence is stocked as Bosch Motorsport WinDarab.
To connect a laptop to the ECU you need the MSAボックス2 — the standard PC-to-ECU interface for the Bosch Motorsport range. It cannot be calibrated without one, so budget for it as part of any ECU purchase.
より広い Bosch Motorsport
A Bosch Motorsport ECU rarely runs alone. The connector, power, sensing, and chassis hardware integrates over CAN and (on the MS 7 series) SERCOS Ethernet:
- 配電： the PowerBox range — PBX90 (NAIST) および PBX 190 — replaces fuses and relays with solid-state, ECU-controlled output channels.
- センサー： pressure, temperature, lambda, and position sensors from the Bosch Motorsport センサー範囲 connect directly, with calibrations already available in RaceCon.
- Vehicle control: VCU MS 50.4 handles chassis and hybrid control functions alongside the engine ECU over deterministic Ethernet.
For the full hardware range, including displays and data loggers, see the Bosch Motorsport カテゴリ.
