Raychem IDENT markers are short heat shrink sleeves used to identify individual wires in a motorsport harness by circuit number, connector cavity, or destination. The MIL-STD-681 colour code assigns a digit (0–9) to each of ten standard colours; placing two or three sleeves end-to-end encodes a multi-digit number onto the wire. This kit contains 2500 Green markers — MIL-STD code 5. The 2500-piece kit is suited to teams building multiple harnesses to the same specification, or to high-density looms where one digit appears on a large number of wires. Material is Raychem heat shrink with a 3:1 shrink ratio; the 1.5 mm ID as supplied recovers to 0.5 mm, gripping wire ODs from 0.5 to 1.5 mm.
Specifications
| Property | Value |
|---|---|
| Manufacturer | Raychem |
| Colour | Green |
| MIL-STD-681 code | 5 — Green |
| Pieces per kit | 2500 |
| ID as supplied | 1.5 mm |
| ID after recovery | 0.5 mm |
| Shrink ratio | 3:1 |
| Fits wire OD | 0.5–1.5 mm |
| Material | Heat shrink sleeve |
| SKU | IDENT-1.5/.5-4-5-2500 |
How to Use Wire IDENT Markers
Apply one sleeve per digit of the identification number, reading left to right from the connector end. Slide each sleeve onto the wire before crimping and terminating. After assembly, shrink in position with a heat gun.
MIL-STD-681 colour code:
| Code | Colour |
|---|---|
| 0 | Black |
| 1 | Brown |
| 2 | Red |
| 3 | Orange |
| 4 | Yellow |
| 5 | Green |
| 6 | Blue |
| 7 | Violet |
| 8 | Grey |
| 9 | White |
Example: Wire circuit 235 receives a Red (2) sleeve, then an Orange (3) sleeve, then a Green (5) sleeve, in that order from the connector end.
Browse all Wiring IDENT Kits — 1000pc and 2500pc kits in all MIL-STD colours.
Reviews
There are no reviews yet.