SFS Performance silicone 90° elbow in black. 3-ply polyester-reinforced construction with a 4.5 mm wall. Available in 35 mm and 41 mm internal diameter. The 90° bend provides a right-angle turn in one moulded piece — no additional fittings required.
Specifications
| Property | Value |
|---|---|
| Construction | 3-ply polyester reinforced |
| Wall thickness | 4.5 mm |
| Bend angle | 90° |
| Min temperature | −50 °C |
| Max temperature | 180 °C |
| Colour | Black |
| Available ID | 35, 41 mm |
| Manufacturer | SFS Performance, United Kingdom |
Suitable Applications
- Turbocharger compressor outlet hose
- Intercooler charge air pipes
- Coolant hoses (radiator, heater circuit)
- BOV / blow-off valve inlet hose
Not Suitable For
Do not use in fuel delivery, fuel return, or oil lines. Silicone is not resistant to hydrocarbons. For fuel or oil lines, use PTFE-lined hose.
Frequently Asked Questions
Is there a blue version with more sizes?
Yes — see SFS Performance Silicone 90° Elbow Blue. Available in 25, 41, and 80 mm ID.
What clamp should I use?
Worm-drive or T-bolt clamp positioned 10–15 mm from the end of the hose. T-bolt clamps are recommended for charge air use.
Is the diameter stated the inside or outside measurement?
Internal diameter (ID). Match to the outside diameter of your pipe or spigot.
Are both hose legs the same length?
Yes. Both legs are equal length, approximately 80–100 mm from the bend centreline to the cut end.
Reviews
There are no reviews yet.