HellermannTyton 1181-4-G is a 90-degree moulded boot with retention lip in fluid resistant modified elastomer. Use this boot where the cable harness must change direction immediately behind the connector — typical in tight chassis installations where a straight boot would cause the cable to strain against the boot wall. Direct alternative to Raychem 224W221-25-0.
HellermannTyton 1181-4-G Specifications
| Property | Value |
|---|---|
| Moulded shape | 90° |
| Lipped | Yes |
| H — Large End diameter, as supplied | 12.0 mm |
| H — Large End diameter, after recovery | 9.8 mm |
| J — Small End (port) diameter, as supplied | 6.0 mm |
| J — Small End (port) diameter, after recovery | 2.0 mm |
| P — Total length, after recovery | 19 mm |
| Operating temperature | -75°C to +150°C |
| Min. shrink temperature | +135°C |
| Adhesive pre-coat | No |
| Material | Fluid Resistant Elastomer |
Note: apply HellermannTyton V9500 Epoxy for a fully sealed system.
Raychem Alternative
This product is a direct alternative to Raychem 224W221-25-0. Dimensions and operating temperature are equivalent.
Compatible Connectors
Suits shell size 6 connectors:
- Souriau 8STA shell 6 connectors
- Deutsch ASL (MicroLITE) connectors
- Deutsch DTM connectors with E007 backshell
Reviews
There are no reviews yet.