TE Connectivity Micro-Timer II female terminal (P/N 964274-2), tin plated, for 0.5–1 mm² conductor. Micro-Timer II is the sealed 1.2 mm contact system used across European sensor and ECU connectors — the size below Junior Power Timer, and the contact most engine-bay signal circuits run on.
At 1.2 mm the contact suits signal and low-current supply circuits. For relay, actuator and ignition loads, step up to the 2.8 mm JPT system rather than paralleling Micro-Timer contacts.
Technical Specification
| Property | Value |
|---|---|
| Contact family | Micro-Timer II |
| Contact size | 1.2 mm |
| Gender | Female (receptacle) |
| Plating | Tin |
| Wire range | 0.5–1 mm² (≈20–17 AWG) |
| Termination | Crimp |
| Manufacturer | TE Connectivity |
| TE P/N | 964274-2 |
Sealed Assembly
In a sealed Micro-Timer II housing each contact carries an individual wire seal, slid onto the wire before crimping. Unused cavities take a blind plug. A cavity left open defeats the seal for the whole connector, not only that circuit.
- Tyco MQS Cable Seal Yellow 0.3–0.4 mm² — cable seal for 0.3–0.4 mm² wire
- Bosch Wire Seal Blue 0.35–1 mm² — Bosch wire seal for 0.35–1 mm² wire
Related Terminals
| Terminal | System | Wire range |
|---|---|---|
| JMT Female Terminal 0.5–1 mm² Micro-Timer II | Micro Timer II 1.2 mm | 0.5–1 mm² |
| TE JPT Female Terminal 0.5–1 mm² | JPT 2.8 mm | 0.5–1 mm² |
| Kostal MLK 1.2 Female Terminal 0.17–0.25 mm² | Kostal MLK 1.2 mm | 0.17–0.25 mm² |
Reviews
There are no reviews yet.