Raychem DR-25 1/2″ has a 12.7 mm supplied inner diameter that recovers to 6.4 mm. It covers the main trunk runs of ECU harnesses and larger sensor looms in motorsport applications.
Specifications
| Property | Value |
|---|---|
| Size | 1/2″ |
| Supplied inner diameter | 12.7 mm |
| Recovered inner diameter | 6.4 mm |
| Shrink ratio | 2:1 |
| Temperature range | −75°C to +150°C |
| Recovery temperature | 175°C |
| Standard | MIL-DTL-23053/16 Class 1 |
| Flame retardant | Yes |
| Chemical resistance | Aviation fuel, diesel, hydraulic fluid, lubricating oils |
| Adhesive liner | No |
| Colour | Black |
Typical Use — 1/2″ (12.7 mm)
At 12.7 mm supplied diameter, this size covers:
- 15–25 wire harness trunks (22 AWG bundle OD ~9–12 mm)
- ECU harness main runs from the ECU connector to the firewall
- Sensor harness trunks where multiple sub-branches merge
- Protection over large-diameter multi-pin connector pigtail bundles
For 8–15 wire branches, use DR-25 3/8″ (9.5/4.8 mm). For 25–50 wire main loom sections, use DR-25 3/4″ (19/9.5 mm).
Ordering Notes
Per metre: Ordering a quantity in metres gives one continuous cut length — not separate pieces. 5 m ordered = one 5 m length of DR-25 1/2″.
Full spool: 60 m factory spool, supplied wound.
Raychem System 25
DR-25 1/2″ is part of the Raychem System 25 harness system. Use alongside:
- DR-25 range — all sizes — outer jacketing for all harness runs
- Raychem System 25 moulded boots — connector backshell sealing (part numbers with “-25”, e.g. 204W221-25-0)
- HellermannTyton equivalent boots — same sealing function (“-G” suffix, e.g. 1030-4-G)
- V9500 epoxy — sealant for boot-to-loom transitions
Reviews
There are no reviews yet.