Raychem DR-25 3/16″ has a 4.8 mm supplied inner diameter that recovers to 2.4 mm. It covers small multi-wire branches and provides individual protection for thicker gauge wires used for high-current circuits.
Specifications
| Property | Value |
|---|---|
| Size | 3/16″ |
| Supplied inner diameter | 4.8 mm |
| Recovered inner diameter | 2.4 mm |
| Shrink ratio | 2:1 |
| Temperature range | −75°C to +150°C |
| Recovery temperature | 175°C |
| Standard | MIL-DTL-23053/16 Class 1 |
| Flame retardant | Yes |
| Chemical resistance | Aviation fuel, diesel, hydraulic fluid, lubricating oils |
| Adhesive liner | No |
| Colour | Black |
Typical Use — 3/16″ (4.8 mm)
At 4.8 mm supplied diameter, this size covers:
- 2–4 wire branches (22 AWG, bundle OD ~2.5–4 mm)
- Individual 12–18 AWG wire protection (OD 1.57–2.69 mm)
- Splice protection on thicker conductors
- Small breakout transitions from a larger harness run
For individual 22–26 AWG wire work, use DR-25 1/8″ (3.2/1.6 mm). For 4–8 wire branches, use DR-25 1/4″ (6.4/3.2 mm).
Ordering Notes
Per metre: Ordering a quantity in metres gives one continuous cut length — not separate pieces. 5 m ordered = one 5 m length of DR-25 3/16″.
Full spool: 100 m factory spool, supplied wound.
Raychem System 25
DR-25 3/16″ is part of the Raychem System 25 harness system. Use alongside:
- DR-25 range — all sizes — outer jacketing for all harness runs
- Raychem System 25 moulded boots — connector backshell sealing (part numbers with “-25”, e.g. 204W221-25-0)
- HellermannTyton equivalent boots — same sealing function (“-G” suffix, e.g. 1030-4-G)
- V9500 epoxy — sealant for boot-to-loom transitions
Reviews
There are no reviews yet.