The AiM MXP Strada is the road and dual-purpose variant of the AiM MXP 6-inch dash. It shares the same 6-inch 800 × 480 TFT display, Deutsch Autosport 37+22 pin connectors, 8 analogue inputs at 1,000 Hz, and 1,500+ ECU protocol support as the MXP Logger — as a display-only unit with road-legal warning icons replacing the built-in data logger.
Three CAN buses allow simultaneous connection to the ECU (primary CAN), a SmartyCam 3 camera or lambda controller (expansion CAN), and additional AiM modules on the second CAN — the same CAN capacity as the MXP Logger. This makes the MXP Strada more suitable than the MXS Strada for builds running multiple CAN-connected devices alongside an ECU.
Road-legal warning icons — turn indicators, high beam, oil pressure, engine warning — overlay on any active data display page. As with the MXS Strada, data logging requires an optional AiM ECULog module added to the expansion CAN.
Technical Specifications
| Property | Value |
|---|---|
| SKU | XA5MXPSTRA010 |
| Display | 6.0″ TFT, 800 × 480 px, 1,100 lm |
| Data logging | None built-in (display-only; add ECULog module for logging) |
| Analogue inputs | 8 fully configurable, 1,000 Hz max each |
| CAN connections | 3 (ECU + second CAN + expansion) |
| ECU protocols | 1,500+ via CAN, RS232, K-Line |
| Shift LEDs | 10 configurable RGB |
| Alarm LEDs | 5 configurable RGB |
| Road-legal icons | Yes (indicators, high beam, oil pressure, engine warning) |
| GPS | External GPS09 module via expansion CAN (optional) |
| Wi-Fi | Yes |
| Connectors | 37-pin Deutsch Autosport + 22-pin Deutsch Autosport + Binder |
| Voltage | 9–15 V |
| IP rating | IP65 |
| Dimensions | 189.6 × 106.4 × 24.9 mm |
| Weight | 640 g |
| Software | Race Studio 3 |
MXP Strada vs MXS Strada vs MXP Logger
| Feature | MXS Strada | MXP Strada | MXP Logger |
|---|---|---|---|
| Screen | 5″ | 6″ | 6″ |
| Data logging | No | No | Yes (4 GB) |
| Analogue inputs | 8 @ 500 Hz | 8 @ 1,000 Hz | 8 @ 1,000 Hz |
| CAN lines | 2 | 3 | 3 |
| Connectors | AMP | Deutsch Autosport | Deutsch Autosport |
| Road icons | Yes | Yes | No |
| GPS included | No (optional) | No (optional) | Yes |
| Weight | ~480 g | 640 g | 590 g |
Accessories
- AiM GPS09 Module
- AiM ECULog
- AiM ACC2 Open Channel Expansion
- AiM SmartyCam 3 Sport
- AiM SmartyCam 3 Corsa
FAQ
Does the MXP Strada have a built-in data logger?
No. The MXP Strada is a display-only unit. Add an AiM ECULog module via the expansion CAN for data logging. If you need logging from a single unit, the MXP Logger is the correct choice.
Why choose the MXP Strada over the MXS Strada?
The MXP Strada has a 6-inch screen versus the MXS Strada’s 5-inch, 8 analogue inputs at 1,000 Hz versus 500 Hz, and 3 CAN buses versus 2. The extra CAN bus allows simultaneous ECU connection plus a SmartyCam and a second expansion device. If your build only needs ECU display with one expansion module, the MXS Strada is sufficient.
Does the MXP Strada use the same harness as the MXP Logger?
Yes. Both use Deutsch Autosport 37+22 pin connectors. The harness is interchangeable between the MXP Logger and MXP Strada, which simplifies conversion between the two if needed.
Reviews
There are no reviews yet.