AiM PDM

AiM PDM Power Distribution Modules: PDM08 & PDM32

An AiM PDM (Power Distribution Module) replaces the fuses, relays, and circuit breakers in a race car’s wiring loom with one solid-state unit. Each output is individually programmable for current limit, PWM soft-start, and automatic fault retry, with real-time diagnostics per channel instead of a blown fuse and no fault code. AiM builds two models: the PDM08, 8 outputs and 100 A total for smaller builds, and the PDM32, 28 high-side plus 4 half-bridge outputs and 120 A total for a full race car power architecture. XTRA Motorsport is an official AiM Sports dealer and supplies both models.

---

PDM08 versus PDM32

Kenmerk	pDM08	pDM32
Totale output	8 hoge zijde	32 (28 high-side + 4 half-bridge)
Hoogst gewaardeerde output	1× 25 A	4× 35 Een halve brug
Totale continue stroom	100 A	120 A
Halfbrug (motoraandrijving)	Nee	Ja
Analoge ingangen	6	8 + 4 digitaal
Afmetingen	161 x 101 x 51 mm	235 x 95 x 50 mm
Gewicht	370 g	761 g
Best voor	Eenzitter, heuvelklim, motorfiets	GT, endurance, rally, volledige paneelvervanging

---

AiM PDM08: 8-Output Power Distribution Module

De PDM08 is ontworpen voor kleinere systemen of voertuigen met een bescheiden elektrisch vermogen. Hij biedt 8 programmeerbare high-side voedingsuitgangen met volledige kortsluitbeveiliging en diagnostische feedback.

PDM08-specificaties:
– 8 hoogspanningsuitgangen
– 1× output up to 20A (with flyback diode)
– 1× uitgang tot 25A
– 6 uitgangen tot 15A elk
– Totale continue maximale stroomsterkte: 100A
– Built-in data logger with GPS09c module support
– CAN-buscommunicatie
– AiM display controller (controls a 5″, 6″, or 10″ display)

---

AiM PDM32: 32-Output Power Distribution Module

The PDM32 is the AiM PDM for full racing car applications: 28 high-side outputs plus four half-bridge outputs for motor and solenoid control, covering every power circuit in a modern race car in a single unit.

PDM32-specificaties:
– 28 high-side vermogensuitgangen + 4 halfbruguitgangen
– 4 krachtige uitgangen tot 20A
– 12 uitgangen met gemiddeld vermogen tot 15A
– 12 laagvermogenuitgangen tot 10A
– 4 halfbruguitgangen tot 35A (PWM-configureerbaar)
– Totale continue maximale stroomsterkte: 120A
– Built-in data logger with GPS09c module support
– CAN-buscommunicatie
– AiM display controller (controls a 5″, 6″, or 10″ display)

---

Waarom zou je een AiM PDM gebruiken?

A PDM eliminates the fuses and relays from the loom, cutting wiring complexity and weight. Current monitoring is per channel, so a fault shows up as a diagnostic instead of a dead circuit. Output behaviour, current limits, and switching logic are all configurable in Race Studio 3, and power data logs alongside engine and chassis channels from the same unit. One PDM replaces a full fuse and relay panel.

---