TE Connectivity Micro-Timer II female terminal (P/N 964274-2), tin plated, for 0.5–1 mm² conductor. Micro-Timer II is the sealed 1.2 mm contact system used across European sensor and ECU connectors — the size below Junior Power Timer, and the contact most engine-bay signal circuits run on.
At 1.2 mm the contact suits signal and low-current supply circuits. For relay, actuator and ignition loads, step up to the 2.8 mm JPT system rather than paralleling Micro-Timer contacts.
Spécifications techniques
| Propriétés | Valeur |
|---|---|
| Contacter la famille | Micro-Timer II |
| Taille du contact | 1.2 mm |
| Genre | Femelle (réceptacle) |
| Placage | Étain |
| Gamme de fils | 0.5–1 mm² (≈20–17 AWG) |
| Résiliation | Ondulation |
| Fabricants | TE Connectivity |
| TE P/N | 964274-2 |
Assemblage scellé
In a sealed Micro-Timer II housing each contact carries an individual wire seal, slid onto the wire before crimping. Unused cavities take a blind plug. A cavity left open defeats the seal for the whole connector, not only that circuit.
- Tyco MQS Cable Seal Yellow 0.3–0.4 mm² — cable seal for 0.3–0.4 mm² wire
- Joint d'étanchéité Bosch bleu 0.35–1 mm² — Joint d'étanchéité Bosch pour fil de 0.35 à 1 mm²
Terminaux associés
| terminal | Système | Gamme de fils |
|---|---|---|
| Terminal femelle JMT 0.5–1 mm² Micro-Timer II | Micro Minuteur II 1.2 mm | 0.5–1 mm² |
| Terminal femelle TE JPT 0.5–1 mm² | JPT 2.8 mm | 0.5–1 mm² |
| Kostal MLK 1.2 Borne Femelle 0.17–0.25 mm² | Kostal MLK 1.2 mm | 0.17–0.25 mm² |
Avis
Il n'y a pas encore d'avis.